D-Link DMC-1001 - Power Supply - hot-plug, Быстрое руководство по установке, Страница: 3 / 9

I
NSTALLATION
Step 1: Connect the supplied AC power cord to the back of the
chassis.
Step 2: Attach the plug into a standard AC outlet with a voltage
range from 100~240Vac.
Step 3:Turn on the chassis system by flipping the switch
beside the receptacle to ON position. The LED on the
front panel of power supply will come on then.
Installing and Removing the Power Supply

To remove a power supply out the chassis, you have to
loose the hand screw counter clockwise and pull out
the power supply from the chassis.

To install a power supply to the chassis, you have to
fasten the hand screw clockwise and slide in the power
supply to the chassis.
Y o u c a n s l id e in a n d o u t t h e p o w e r s u p p ly f ro m t h e b a y ,
f a s t e n o r lo o s e t h e h a n d s c re w c l o c k w is e o r c o u n t e r
c l o c k w is e b y u s i n g h a n d o r s c re w d r i v e r.
3