I
NSTALLATION
Step 1: Connect the supplied AC power cord to the back of the
chassis.
Step 2: Attach the plug into a standard AC outlet with a voltage
range from 100~240Vac.
Step 3: Turn on the chassis system by flipping the switch beside the
receptacle to ON position. The LED on the front panel of
power supply will come on then.
.
Installing and Removing the Power Supply
z
To remove a power supply out the chassis, you have to loose
the hand screw counter clockwise and pull out the power
supply from the chassis.
z
To install a power supply to the chassis, you have to fasten
the hand screw clockwise and slide in the power supply to
the chassis.
Yo u c a n slid e in a nd o ut the p o we r sup p ly fro m the b a y,
fa sten o r lo o se the ha nd sc re w c lo c kwise o r c o unter
c lo c kwise b y using ha nd o r sc re wdriver.
If the Chassis System needs to work alone, you can
stick up four Rubber foot below the chassis!
Attention!
3
