D-Link DKVM-2/4, Руководство пользователя

Страница: 15 / 28

13
M
OUSE
My mouse is not detected during boot up. What can be
the cause?
One of the following may be the case:
Please verify that all mouse cables are inserted
properly. Check especially for a mix-up with the PS/2
keyboard cable, they have the same kind of
connector and are therefore easily confused
.
Read your motherboard documentation and make
sure that the PS/2 mouse IRQ is enabled. (This can
be set for most computers in the BIOS setup pages)
The computers boot properly but I cannot use the
mouse. What can be the cause?
One of the following may be the case:
Please verify that the mouse is plugged into the
DKVM-2/4 unit properly.
Make sure the mouse works properly when plugged
into a computer directly. You will need to reboot the
system to test this.
Try using a different mouse.
Verify that the mouse complies with the PS/2
standard. A combination mouse will work, but it must
be set to PS/2 mode and the correct serial mouse to
PS/2 adapter must be used. A serial mouse with a
serial - PS/2 adapter will not work, since the mouse
signals do not comply with the PS/2 standard.
Make sure that the power adapter is plugged in at
both ends and that it is working correctly. Its rating
must be 9V 600mA.