DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
40
Parameter
Description
User Name
Enter an alphanumeric string of up to 32 characters. This is used to
identify the SNMP users.
Group Name
Enter the SNMP group name to which the user belongs. The syntax
is general string that does not allow spaces.
SNMP Version
Select the SNMP version. Options to choose from are
v1
,
v2c
, and
v3
.
SNMP V3 Encryption
When selecting
v3
in the
SNMP Version
drop-down list, this option is
available. Options to choose from are
None
,
Password
, and
Key.
Auth-Protocol
When selecting
v3
in the
SNMP Version
drop-down list, and
selecting either
Password
or
Key
in the SNMP V3 Encryption drop-
down list, this option is available. Select the authentication level.
Options to choose from are
MD5
, and
SHA
.
MD5
- Select to use the HMAC-MD5-96 authentication level. This
field will require the user to enter a password or a key.
SHA
- Specify that the HMAC-SHA authentication protocol will be
used. This field will require the user to enter a password or a key.
Priv-Protocol
When selecting
v3
in the
SNMP
Version
drop-down list, and
selecting either
Password
or
Key
in the SNMP V3 Encryption drop-
down list, this option is available. Select the private protocol.
Options to choose from are
None
, and
DES56
.
None
- Specify that no authorization protocol is in use.
DES56
- Specify that DES 56-bit encryption is in use, based on the
CBC-DES (DES-56) standard. This field will require the user to enter
a password or a key.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete
button to remove the specified entry.
SNMP Host Table Settings
This window is used to configure and display the recipient of the SNMP notification.
To view the following window, click
Management > SNMP > SNMP Host Table Settings
, as shown
below:
Figure 5-9 SNMP Host Table Settings
