DIP-switches
Pin №
State
Description
Pin 1
ON
To enable broadcast storm rate limit.
OFF
To disable broadcast storm rate limit.
Pin 2
ON
To enable the power alarm.
OFF
To disable the power alarm.
Table 3
Hardware Installation
DIN-Rail Mounting
Mounting steps:
1. Screw the DIN-Rail bracket on with the bracket and screws in the accessory kit.
2. Hook the unit over the DIN-Rail.
3. Push the bottom of the unit towards the DIN-Rail until it snaps into place.
Figure 1 — Mounting the switch on a DIN-Rail
Wall Mounting
Screw on the wall-mount plate on with the plate and M4 screws in the accessory kit.
Figure 2 — Attaching brackets to the switch
3
