DIR-X1530
AX1500 Wi-Fi 6 Gigabit Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Enable TX
Beamforming
Available on the
5 GHz
tab.
TX Beamforming is the signal processing/directing technique which
helps to support a high enough transfer rate in the areas with difficult
conditions for the signal propagation.
Move the switch to the right to improve the signal quality.
OFDMA
Available on the
5 GHz
tab.
OFDMA (
Orthogonal frequency-division multiple access
) is a
Wi-Fi 6 standard technology, that improves performance of wireless
networks with a large number of clients by establishing subcarriers
with independent modulations.
Move the switch to the right to improve the network performance.
TWT
Available on the
5 GHz
tab.
TWT
(Target Wake Time)
is a Wi-Fi 6 standard technology, that
allows to negotiate wireless devices’ wake-up time for data exchange
with the router and to conserve their battery life.
Move the switch to the right to save the battery power for the
connected wireless devices.
B/G protection
Available on the
2.4 GHz
tab.
The 802.11b and 802.11g protection function is used to minimize
collisions between devices of your wireless network.
Select a value from the drop-down list.
•
Auto
: The protection function is enabled and disabled
automatically depending on the state of the network (this
value is recommended if your wireless local area network
consists of both 802.11b and 802.11g devices).
•
Always On
: The protection function is always enabled (this
setting can substantially lower the efficiency of your wireless
network).
•
Always Off
: The protection function is always disabled.
6 Correct operation of the thechnology will be implemented in the next firmaware version.
Page
166
of 254