35
D-Link DIR-600 User Manual
Section 3 - Configuration
Time Settings
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, select enabled
or disabled, and enter a start date and an end date for
daylight saving time.
Press this button to set the device’s time the same to
local PC.
NTP stands for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
Enter the NTP server or select one from the drop-
down menu, then the DIR-600 will sync the same
time to D-Link Internet time server.
To manually input the time, enter the values in these
fields for the Year, Month, Day, Hour, Minute, and
Second and then click
Save Settings
.
Time Zone:
Daylight Saving:
Sync your
Computer’s Time
Settings:
Enable NTP
Server:
NTP Server Used:
Manual:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be configured to automatically adjust the time when needed.
