DIR-882
AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
After creating the rules you need to configure the filtering modes.
To open the basic or additional wireless network for the devices which MAC addresses are
specified on this page and to close the wireless network for all other devices, in the section
corresponding to the band (
2.4 GHz
or
5 GHz
), left-click the line of the wireless network. In the
opened window, move the
Enable MAC filter
switch to the right. Upon that the
MAC filter
restrict mode
drop-down list will be displayed. Select the
Allow
value from the drop-down list
and click the
SAVE
button.
To close the wireless network for the devices which MAC addresses are specified on this page,
select the
Deny
value from the
MAC filter restrict mode
drop-down list and click the
SAVE
button.
To set a schedule for the MAC filter rule, click the
Set schedule
button (
) in the line
corresponding to this rule. In the opened window, you can create a new schedule (see the
section, page 272) or use the existing one. Existing schedules are displayed in the
Interval of
execution
drop-down list in the simplified mode.
To enable the MAC filter rule at the time specified in the schedule and disable it at the other time,
select the
Enable rule
value from the
Action
drop-down list and click the
SAVE
button.
To disable the MAC filter rule at the time specified in the schedule and enable it at the other time,
select the
Disable rule
value from the
Action
drop-down list and click the
SAVE
button.
To change or delete the schedule for a rule, click the
Edit schedule
button (
) in the line
corresponding to this rule. In the opened window, change the parameters and click the
SAVE
button
or click the
DELETE FROM SCHEDULE
button.
Page
178
of 303
