D-Link DIR-878 Скачать руководство пользователя страница 89

Страница: 89 / 191

DIR-878

AC1900 MU-MIMO Wi-Fi Gigabit Router

User Manual

Configuring via Web-based Interface

LAN

To configure the router's local interface, go to the

Connections Setup / LAN

page.

IPv4

Go to the

IPv4

tab to change IPv4 address, configure the built-in DHCP server, or specify MAC

address and IP address pairs.

Figure 73. Configuring the local interface. The

IPv4

tab. The

Local IP Address

section.

Parameter

Description

Local IP Address

Mode of local IP

address assignment

For the

Access point

Repeater

, and

Client

modes only.

Select the needed value from the drop-down list.

Static

: the IP address, subnet mask, and the gateway IP address are

assigned manually.

Dynamic

: the router automatically obtains these parameters from

the LAN DHCP server or from the router to which it connects.

IP address

The IP address of the router in the local subnet. By default, the
following value is specified:

192.168.0.1

Mask

The mask of the local subnet. By default, the following value is
specified:

255.255.255.0

Gateway IP address

For the

Access point

Repeater

, and

Client

modes only.

The gateway IP address which is used by the router to connect to the
Internet (e.g., for synchronizing the system time with an NTP
server).

Optional

Hostname

The name of the device assigned to its IP address in the local subnet.

Page

of 191

Содержание DIR-878
































































































































































































Результаты поиска

Содержание DIR-878

Отзывы:

D-Link DIR-878, Руководство пользователя, Страница: 89 / 191

Результаты поиска

Содержание DIR-878

Отзывы: