11
D-Link DIR-869 User Manual
Section 1 - Product Overview
Access Point Mode
Create a Wireless Network using Ethernet
The DIR-869 operates as an Access Point when the mode switch is in the
Extender
position and an Ethernet cable is connected
to the Internet Port from an uplink network. In Access Point Mode, the DIR-869 connects your wireless devices together, but
does not provide routing functionality. It also allows a connected wired devices to connect to your other devices wirelessly.
This can be useful if you already have an existing Internet router that does not have built-in wireless capabilities. The DIR-869
creates a new wireless network and devices connected via Wi-Fi and LAN ports obtain IP addresses from the existing router.
Use a Gigabit capable Ethernet connection where possible to ensure the best networking experience.
Create a Wireless Network using Ethernet (Access Point Mode)
Use this mode for:
• Extending your current network.
• Bringing Wi-Fi to an area it doesn't currently reach.
Place your DIR-869 near the area you wish to bring Wi-Fi to and connect via Ethernet cable to your uplink network.
Broadband
Connection Device
(e.g. DSL/Cable Modem)
Router
(Optional)
Internet
DIR-869
Access Point Mode
Wired and Wireless Devices
Note:
Extending network to desired location via Ethernet may require purchase of additional cable.
