D-Link DIR-865L Скачать руководство пользователя страница 54

Страница: 54 / 160

D-Link DIR-865L User Manual

The following parameters will be available for configuration:

Wireless Band:

Displays the wireless band being config-

ured. In this option we find that the fol-

lowing parameters will be regarding the

2.4GHz band.

Enable Wireless:

Check the box to enable the wireless func-

tion. If you do not want to use wireless,

uncheck the box to disable all the wireless

functions. Select the time frame that you

would like your wireless network enabled.

The schedule may be set to Always. Any

schedule you create will be available in

the drop-down menu. Click New Schedule

to create a new schedule.

Wireless Network Name:

The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The

SSID is case-sensitive. Enable Auto Channel

802.11 Mode:

Here the user can manually select the preferred frequency band to use for this wireless network.

Enable Auto Channel Scan:

The auto channel selection setting can be selected to allow this device to choose the channel with the least

amount of interference.

Wireless Channel:

By default the channel is set to 1. The Channel can be changed to fit the channel setting for an existing wireless

network or to customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out.

Transmission Rate:

Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance.

Channel Width:

When using the 802.11n frequency band, the user have an option to choose between a 20MHz or 20/40MHz band-

width.

Visibility Status:

The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless

network name is broadcasted to anyone within the range of your signal. If you are not using encryption then they

could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID)

on the client manually to connect to the network.

Содержание DIR-865L

































































































































































Результаты поиска

Содержание DIR-865L

Отзывы:

D-Link DIR-865L, Руководство пользователя, Страница: 54 / 160

Результаты поиска

Содержание DIR-865L

Отзывы: