background image

127

D-Link DIR-835 User Manual

Appendix E - Warranty

Warranty

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:

•  Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and

•  Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions 

or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.

Limited.Warranty:

D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship 

and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except 

as otherwise stated herein.

•  Hardware (excluding power supplies and fans): One (1) year

•  Power supplies and fans: One (1) year

•  Spare parts and spare kits: Ninety (90) days

The  customer’s  sole  and  exclusive  remedy  and  the  entire  liability  of  D-Link  and  its  suppliers  under  this  Limited Warranty  will  be,  at  

D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual 

purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware 

need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any 

reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. 

Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer, 

and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical 

to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link 

upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, 

shall become the property of D-Link upon replacement or refund.

Содержание DIR-835












































































































































Отзывы: