DIR-430 RangeBooster G Wireless Router User’s Guide
Version : 1
.0
ȱ
Firmware
Before you can upgrade firmware, you must download the latest firmware version
from the D-Link Support Website
http://support.dlink.com
.
It is highly recommended to store the current image on your PC before you
perform firmware upgrade operation. DO NOT perform the upgrade over a
wireless connection. Doing so may render the device unusable.
ȱ
To upgrade firmware on the DIR-430, click on
Tools
on the top panel, and then
click on
Firmware
on the left hand menu to show the configuration as outlined
below.
Click on
Browse...
button, select the downloaded image and click on
Upgrade
button. The DIR-430 will be rebooted automatically in order to reflect your new
image. A pop up window will be displayed to notify of the reboot. Clicking the Ok
button will continue the upgrade process, cancel button will stop it.
Once user enters the Ok button, you would observe the progress of the firmware
upgrade as shown below. Please note that the operation takes a few minutes.
Once firmware upgrade is successful, you will see that the DIR-430 gets rebooted
automatically. If it does not reboot and give you the web configuration login
page, power cycle the DIR-430.
In case the DIR-430 is powered down, or disconnected from the network during
firmware upgrade, the firmware may be corrupted. Please contact D-Link
Technical Support for a resolution if within the factory warranty period.
ȱ
Page
ȱ
82
ȱ
of
ȱ
103
ȱ