37
D-Link DIR-140L User Manual
Section 3 - Configuration
Check this box to enable IPSec.
Enter a name for your VPN tunnel.
Enter the local (LAN) subnet and mask.
(ex. 192.168.0.0/24)
Select if you will be connecting as a remote user or on a site
to site basis.
Enter the remote subnet and mask.
Enter the key for authentification.
If you choose to enable
XAUTH
you need to choose between
Server mode with an Authetification database, or Client mode
with a user name and password.
Enter the local identification for how you appear on the
network VPN when connected locally.
Enter the local identification for how you appear on the
network VPN when connected remotely.
IPSec:
Name:
Local Subnet/
Netmask:
Remote IP:
Remote Subnet/
Netmask:
Authentification
Pre-Shared Key:
Authentification
XAUTH:
Local ID:
Remote ID:
IPSec Settings
The DIR-140L supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) protocols can provide IP security at the network layer.
