D-Link DI-804 Скачать руководство пользователя

Страница: 69 / 75

shipping package to ensure that it will not be damaged in transit, and the

RMA number must be prominently marked on the outside of the package.

The packaged product shall be insured and shipped to D-Link, 53 Discovery

Drive, Irvine CA 92618, with all shipping costs prepaid. D-Link may reject

or return any product that is not packaged and shipped in strict compliance

with the foregoing requirements, or for which an RMA number is not visible

from the outside of the package. The product owner agrees to pay D-Link’s

reasonable handling and return shipping charges for any product that is not

packaged and shipped in accordance with the foregoing requirements, or

that is determined by D-Link not to be defective or non-conforming.

What Is Not Covered:

This limited warranty provided by D-Link does not cover:

Products that have been subjected to abuse, accident, alteration,

modification, tampering, negligence, misuse, faulty installation, lack of

reasonable care, repair or service in any way that is not contemplated in the

documentation for the product, or if the model or serial number has been

altered, tampered with, defaced or removed;

Initial installation, installation and removal of the product for repair, and

shipping costs;

Operational adjustments covered in the operating manual for the product,

and normal maintenance;

Damage that occurs in shipment, due to act of God, failures due to power

surge, and cosmetic damage; and

Any hardware, software, firmware or other products or services provided by

anyone other than D-Link.

Содержание DI-804












































































Результаты поиска

Содержание DI-804

Отзывы:

Похожие инструкции для DI-804

Бренды по названию

Популярные бренды

D-Link DI-804, Руководство пользователя

Результаты поиска

Содержание DI-804

Отзывы:

Похожие инструкции для DI-804

Бренды по названию

Популярные бренды