D-Link DI-724GU - Wireless 108G QoS Gigabit Office... Скачать руководство пользователя страница 9

Страница: 9 / 89

D-Link DI-724GU User Manual

Section 1 - Product Overview

Hardware Installation

First, connect the power adapter to the receptor at the back panel of the DI-724GU and then plug the other end

of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.

1. Power off your Cable or DSL modem; some devices may not have a on/off switch and will require you to unplug

the power adapter. Now, the DI-724GU should be powered on and the Cable/DSL modem should be turned off.

2. Cable/DSL modem (

Power Off

) – DI-724GU (

Power On

) Connect an Ethernet cable to the Ethernet jack located

on the Cable/DSL modem. After the Ethernet cable is securely connected, power on the Cable/DSL modem by

turning on the unit or plugging in the power adapter.

3. Cable/DSL modem (

Power On

) – DI-724GU (

Power On

) Insert the other end of the Ethernet cable to the WAN

PORT on the back panel of the DI-724GU. The WAN LED light will illuminate to indicate proper connection. If

the WAN LED is not illuminated, please go back to step B1 and repeat the instructions.

Insert an Ethernet cable to LAN port 1 on the back panel of the DI-724GU and an available Ethernet port on

the network adapter in the computer you will use to conﬁgure the DI-724GU. The LED light for LAN Port 1 will

illuminate to indicate proper connection.

Note:

The LAN Ports on the DI-724GU are Auto-MDI/MDIX. Meaning you can use a straight-through or crossover

Ethernet cable to the LAN Ports

Computers equipped with 802.11g wireless adapters will be able to connect to the DI-724GU. The DWL-G650

Air

Plus

Xtreme G

Wireless Cardbus Adapter and the DWL-G520

Air

Plus

Xtreme G

Wireless PCI Adapter will be

able to connect out of the box with the router using their default wireless settings.

Содержание DI-724GU - Wireless 108G QoS Gigabit Office...


























































































Результаты поиска

Содержание DI-724GU - Wireless 108G QoS Gigabit Office...

Отзывы:

Бренды по названию

Популярные бренды

D-Link DI-724GU - Wireless 108G QoS Gigabit Office..., Руководство пользователя

Результаты поиска

Содержание DI-724GU - Wireless 108G QoS Gigabit Office...

Отзывы:

Бренды по названию

Популярные бренды