STEP 1
CONNECT ONE OF THE
ADAPTORS TO YOUR
MODEM OR ROUTER
BITS YOU’LL NEED:
A.
WHITE ADAPTOR
B.
ETHERNET CABLE
Go to the room with your existing modem or router.
Plug one end of the Ethernet Cable
(B)
into a spare port on the back of your
existing modem or router.
Plug the other end of the Ethernet Cable
(B)
into the top of the Adaptor
(A).
Plug the Adaptor
(A)
attached to the Ethernet Cable
(B)
into a power point
near your existing modem or router.
(B)
YOUR MODEM
WALL POWER POINT
(A)
IF YOU’RE USING POWERBOARDS, EXTENSION CORDS
OR SURGE-PROTECTION BOARDS
DO
plug the Adaptor
(A)
directly into the wall socket.
DO
plug the extension cord, surge-protection board or powerboard into the power
socket on the front face of the Adaptor
(A)
only if it is plugged into the wall.
DON’T
plug the Adaptor
(A)
directly into an extension cord, surge-protection
board or powerboard.
(A)
POWER BOARD
(A)
POWER BOARD
3
