D-Link DHP-301 - PowerLine HD EN Starter, Руководство пользователя

Страница: 15 / 28

1 D-Link DHP-300 User Manual
Section 3 - Configuration
Click
Next
Configure the PLC connected nodes first (the remote DHP-300
which is not connected to the PC), and configure the ETH connected
node last (the local DHP-300 connected to the PC).
Note: If you configure the ETH node first and change the Net ID or
Encryption Key, you will not have access to the PLC nodes.
To configure a DHP-300, select it and click Next to continue. If
you want to configure a node using Advance Configuration, skip
to page 18.
This screen shows the current configuration of the DHP-300. You
can modify any of the parameters and click
Next
to save your
configuration.
• Net ID : Powerline network name (case sensitive).
Default is
DHP-300
• Encryption Key : Powerline network password (alphanumeric).
Default is
DHP-300
• Password : Configuration Assistant password (alphanumeric).
Default is
admin
• Alias : Device name (case sensitive).
Default is
Device 1, Device 2,
etc...
Note: Net ID and Encryption Key can be changed to prevent unauthorized access to your powerline network. Make
sure the
Net ID and Encryption Key of the devices within your powerline network are the same to enable data
transmission.
Click
Next