D-Link DGS-3324SR Скачать руководство пользователя страница 317

Страница: 317 / 392

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

302

Md/Mkdir

The following window is used to make a new directory on the CompactFlash card. To view this window, click

Maintenance > CF Services > FS Command > Md/Mkdir

. To accomplish this, enter a new path and filename into the

space provided and click the

Apply

button.

Figure 10- 21. Make a new Directory window

Rd/Rmdir

The following window is used to delete a file located on the CompactFlash Card. To view this window, click

Maintenance

> CF Services > FS Command > Rd/Rmdir

Figure 10- 22. Remove a Directory window

To remove a directory, enter the full name and path into the space provided and click

Apply

Dir

This window is used to view directories and files located on the CompactFlash card. To view this window, click

Maintenance > CF Services > FS Command > Dir

Figure 10- 23. Dir window

To search for a specific file located on the CF card, enter the full name and path of the file into the

Path Name

field and

click

Find

. Files found will be displayed in the

Dir Result Table

located at the bottom of the screen.

Rename

This window is used to rename files located on the CompactFlash card. To view this window, click

Maintenance > CF

Services > FS Command > Rename

Figure 10- 24. Rename window

To rename a file, enter the current name of the file into the

Old File Name

field and then enter the updated file name into

the

New File Name

and click

Apply

Содержание DGS-3324SR








































































































































































































































































































































































































Результаты поиска

Содержание DGS-3324SR

Отзывы:

D-Link DGS-3324SR, Руководство пользователя, Страница: 317 / 392

Результаты поиска

Содержание DGS-3324SR

Отзывы: