D-Link DGS-3224SR Скачать руководство пользователя страница 140

Страница: 140 / 140

Limitation of Liability:

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS

NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER

LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT,

INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR

LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER

FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER

PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF

INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY

PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE

USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY

BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE

FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE

DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK

UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT

COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES

AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR

REMEDIES, EXPRESS, IMPLIED OR STATUTORY.

Governing Law

: This Limited Warranty shall be governed by the laws of the state of

California. Some states do not allow exclusion or limitation of incidental or consequential

damages, or limitations on how long an implied warranty lasts, so the foregoing limitations

and exclusions may not apply. This limited warranty provides specific legal rights and the

product owner may also have other rights which vary from state to state.

Содержание DGS-3224SR













































































































































Результаты поиска

Содержание DGS-3224SR

Отзывы:

D-Link DGS-3224SR, Руководство пользователя, Страница: 140 / 140

Результаты поиска

Содержание DGS-3224SR

Отзывы: