23
The
“Help TAB”
has the About function. It will show the current
version of the Web Management Utility.
Configuring the Switch
The DGS-1216T Web Smart Switch has a Web GUI interface for
smart switch configuration. The Switch can be configured through
the Web Browser. A network administrator can manage, control,
and monitor the Switch from the local area network. This section
indicates how to configure the Switch to enable its smart functions
including:
Port Setting (Speed/Disable, Duplex mode, Flow Control, and
Port base QoS)
Virtual LAN Group setting (VLAN)
Port Trunking
Port Mirroring
System Setting
Device status and Statistic
Login
Before you configure this device, note that when the Web Smart
Switch is configured through an Ethernet connection, make sure
the manager PC must be set on same the
IP network
. For
example, when the default network address of the default IP
address of the Web Smart Switch is
192.168.0.1
, then the manager
PC should be set at 192.168.0.x (where x is a number between 2
and 254), and the default subnet mask set at 255.255.255.0.
Open a Web browser such as Internet Explorer 5.0 or above.
Enter IP address
http://192.168.0.1
(the factory-default IP address
setting) to the address location.
Figure 13.
