D-Link DGS-1210-12TS/ME Скачать руководство пользователя страница 148

Страница: 148 / 159

4 Configuration

DGS-1210 series Metro Ethernet Managed Switch User Manual

Protocol VLAN ID :

Specifies the VLAN ID to be enabled or disabled in the LLDP port. If select Enabled,

users can specifies the content of VLAN ID.

VLAN Name :

Specifies the VLAN name to be enabled or disabled in the LLDP port. If select Enabled, users

can specifies the content of VLAN Name.

Protocol Identity :

Specifies the Protocol Identity to be enabled or disabled in the LLDP port. If select

Enabled, users can specifies the EAPOL, LACP, GVRP, STP or ALL.

Click

Apply

to implement changes made and click

Refresh

to refresh the table information.

LLDP > 802.3 Extension LLDP Port Settings

The 802.3 Extension LLDP Port Settings page displays 802.3 Extension LLDP port information and contains
parameters for configuring 802.3 Extension LLDP port settings.

Figure 4.218 – LLDP > 802.3 Extension LLDP Port Settings

From Port/To Port:

A consecutive group of ports may be configured starting with the selected port.

MAC/PHY Configuration/Status:

Specifies whether the MAC/PHY Configuration Status is enabled on the

port. The possible field values are:

Enabled –

Enables the MAC/PHY Configuration Status on the port.

Disabled –

Disables the MAC/PHY Configuration Status on the port.

Power Via MDI:

Advertises the Power via MDI implementations supported by the port. The possible field

values are:

Enabled –

Enables the Power via MDI configured on the port.

Disabled –

Disables the Power via MDI configured on the port.

Link Aggregation:

Specifies whether the link aggregation is enabled on the port. The possible field values

are:

Enabled –

Enables the link aggregation configured on the port.

Disabled –

Disables the link aggregation configured on the port.

Maximum Frame Size:

Specifies whether the Maximum Frame Size is enabled on the port. The possible

field values are:

Enabled –

Enables the Maximum Frame Size configured on the port.

Disabled –

Disables the Maximum Frame Size configured on the port.

Define these parameter fields. Click

Apply

to implement changes made and click

Refresh

to refresh the

table information.

LLDP > LLDP Management Address Settings

The LLDP Management Address Settings allows the user to set management address which is included in
LLDP information transmitted.

Содержание DGS-1210-12TS/ME































































































































































Результаты поиска

Содержание DGS-1210-12TS/ME

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-1210-12TS/ME, Руководство пользователя

Результаты поиска

Содержание DGS-1210-12TS/ME

Отзывы:

Бренды по названию

Популярные бренды