4 Configuration
D-Link Web Smart Switch User Manual
86
Figure 4.119 – SNMP > SNMP > SNMP View
View Name:
Name of the view, up to 32 characters.
Subtree OID:
The Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB tree)
that will be included or excluded from access by an SNMP manager.
OID Mask:
The mask of the Subtree OID. 1 means this object number is concerned, 0 means do not
concerned. For example 1.3.6.1.2.1.1 with mask 1.1.1.1.1.1.0 means 1.3.6.1.2.1.X.
View Type:
Specify the configured OID is Included or Excluded that a SNMP manager can access.
Click
Add
to create a new view,
Delete
to remove an existing view.
SNMP > SNMP > SNMP Community
This page is used to maintain the SNMP community string of the. SNMP managers using the same
community string are permitted to gain access to the Switch's SNMP agent.
Community Name:
Name of the community string
User Name (View Policy):
Specify the read/write or read-only level permission for the MIB objects
accessible to the SNMP community.
Figure 4.120 –SNMP > SNMP > SNMP Community
Click
Add
to create a new SNMP community,
Delete
to remove an existing community.
SNMP > SNMP > SNMP Host
This SNMP Host page is to configure the SNMP trap recipients.
Figure 4.121 – SNMP > SNMP > SNMP Host
Host IP Address:
Select IPv4 or IPv6 and specify the IP address of SNMP management host.
SNMP Version:
Specify the SNMP version to be used to the management host.
Community String/SNMPv3 User Name:
Specify the community string or SNMPv3 user name for the
management host.
