D-Link DGS-1100-05PDV2 страница 47 Скачать руководство пользователя | Manualshive

Страница: 47 / 56

background image

Regulatory Statements

D-Link Smart Managed Switch User Manual

44

Regulatory Statements

CE Mark Warning:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.

Power Usage (for DGS-1100-08PV2 only)

This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically
switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is
not needed during certain periods of time, it can be unplugged to save energy.

Network Standby

: 2.27 watts

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Non-modification Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Innovation, Science and Economic Development Canada (ISED) Statement

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Japan Voluntary Control Council for Interference Statement

この装置は、クラス

B

情報技術装置です。この装置は、家庭環境で使用することを目的としています

が、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがありま
す。

取扱説明書に従って正しい取り扱いをして下さい。

VCCI-B

Japan Voluntary Control Council for Interference Statement

This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television

receiver in a domestic environment, it may cause radio interference. Install and use the equipment according

to the instruction manual.

SAFETY INSTRUCTIONS

«
...
45
46
47
48
49
...
»

Содержание DGS-1100-05PDV2

























































Отзывы:

Нет отзывов

Похожие инструкции для DGS-1100-05PDV2

Бренд: H3C Страницы: 17

PARAGON II Series

Бренд: Raritan Страницы: 1

Paragon Manager

Бренд: Raritan Страницы: 117

SwitchView SC8 DVI

Бренд: Avocent Страницы: 2

Nexoos 370 Series

Бренд: Soyntec Страницы: 7

Бренд: VADA Страницы: 4

KingShield T206-C

Бренд: Green Brook Страницы: 2

Бренд: Konig Страницы: 40

Бренд: Lantech Страницы: 24

Бренд: IPGARD Страницы: 2

Бренд: BZB Gear Страницы: 27

Бренд: IOGear Страницы: 54

Бренд: Omron Страницы: 11

AMX Enova AVX-400

Бренд: Harman Страницы: 2

Бренд: ICP DAS USA Страницы: 70

Expert Power Control NET 24x

Бренд: Gude Страницы: 25

Бренд: Hitachi Страницы: 30

PowerConnect W-IAP3WN

Бренд: Dell Страницы: 246

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды