3
EN
G
LIS
H
The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential problem with the
switch, connection or attached devices.
. Power
The Power LED lights up when the Switch is connected to a power source.
. Port Link/Act/Speed LED (1-48):
The Link/Act/Speed LED flashes, which indicates a network link through the corresponding port. Blinking
indicates that the Switch is either sending or receiving data to the port. When a port has an amber light, this
indicates that the port is running on 10M or 100M. When it has a green light it is running on 1000M.
. Port Link/Act/Speed LED (49F, 50F, 51F, 52F, 49T, 50T, 51T, 52T):
The Link/Act/Speed LED flashes, which indicates a network link through the corresponding port. Blinking
indicates that the Switch is either sending or receiving data to the port. When the port LED glows in amber, it
indicates the port is running on 100M. When the port LED glows in green, it is running on 1000Mbps.
Note:
The MiniGBIC ports are shared with normal RJ-45 ports 49T, 50T, 51T and 52T. When the MiniGBIC port is
used, the RJ-45 port cannot be used.
Connecting the DGS-1052 to your network
LED Indicators
DGS-1052
Front panel
DGS-1052
