D-Link DGE-660TD, Быстрая установка, Страница: 4 / 12

D-Link DGE-660TD Installation Guide
Insert the Adapter
This section refers to all users, regardless of which operating
system you use.
NOTE: You must first install the drivers as explained in
Section 1. If you have not done this and you have inserted the
DGE-660TD into the Cardbus slot, you will need to cancel
the New Hardware Wizard, and start over at the beginning
of this installation guide.
• Insert the DGE-660TD into the Cardbus slot of your laptop.
• Gently insert the front end of the DGE-660TD into the Cardbus
slot on your laptop until it is firmly seated. Make sure that the
card is face-up, as shown. Do not force the insertion.
• Connect an Ethernet Cable (CAT5) from a switch or hub to
the DGE-660TD.