D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network..., Руководство пользователя

Страница: 20 / 53

D-Link DGE-560T User Manual
Configure your Adapter
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e
router) automatically. To verify your IP address, please see follow the steps below:
Windows ® 2000/XP: Click on
Start
>
Run
. In the run box type
cmd
and click
OK
.
Windows Vista ™ : Click on
Start
>
All.Programs
>
Accessories
>
Command.Prompt
.
At the prompt, type
ipconfig
and press
Enter
.
This will display the IP address, subnet mask, and the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs
may block a DHCP request on newly installed adapters.