manualshive.com logo in svg

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter, Руководство пользователя

Поделиться
Скачать
D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter Скачать руководство пользователя страница 52

D-Link DGE-560T User Manual

For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local 
D-Link office.

Industry.Canada.Notice:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that 
may cause undesired operation.
 

IMPORTANT.NOTE:
Radiation.Exposure.Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed 
and operated with minimum distance 20cm between the radiator & your body.
 
This device has been designed to operate with an antenna having a maximum gain of 2 dB. Antenna having a higher gain is strictly 
prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.

Содержание DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды