2
Hardware Installation
Before you start, make sure to turn off your computer and unplug the
power cord.
1. Shut
down
the
computer
and unplug the power cord.
2. Remove the chassis cover.
3. Insert the card into an empty PCI-Express slot.
4. Replace the computer chassis cover.
5. Reconnect the power cord and turn the computer on. If the BIOS section of
your computer is plug and play compliant, then at the power up the BIOS will
automatically recognize and configure any newly installed DGE–560SX
Adapter.
Installing the DGE-560SX Driver
1. Turn
on
the
computer.
2. Insert the driver CD included with the DGE–560SX into the CD ROM.
3. For Windows OS, the screen shown below will appear automatically. Click
Install Driver
and follow the instructions on the installation wizard. The
following drivers are supported:
Caution: To avoid damage caused by static electricity, make sure to properly
ground yourself by first touching a metal part of your computer to discharge any
static electricity before working with the DGE-560SX Ethernet Adapter.
