manualshive.com logo in svg

D-Link DFL-500, Руководство пользователя

Вам нужна помощь с установкой вашего межсетевого экрана D-Link DFL-500? Бесплатно загрузите Руководство по быстрой установке на нашем сайте manualshive.com. В этом мануале вы найдете все необходимые инструкции для настройки устройства быстро и легко. Не упустите возможность получить информацию из первых рук.

Поделиться
Скачать
background image

Virus protection 

DFL-500 antivirus protection screens the information found in web (HTTP protocol) and email content (SMTP, 
POP3, and IMAP protocols) as it passes through the DFL-500. The content can be contained in normal 
network traffic that is allowed to pass between DFL-500 interfaces as well as in IPSec VPN traffic. 
Antivirus protection screens content traffic for the following types of target files that can contain viruses: 

· 

Executable files (exe, bat, and com) 

· 

Visual basic files (vbs) 

· 

Compressed files (zip, gzip, tar, hta, and rar) 

· 

Screen saver files (scr) 

· 

Dynamic link libraries (dll) 

· 

MS Office files that contain macros 

You can configure antivirus protection to: 

· 

Block target files 
The DFL-500 removes target files and attachments that can contain viruses from content protocol data 
streams. You can configure antivirus protection to remove all target files or only selected target file types. 
You can also configure antivirus protection to remove different target file types from each content protocol. 
Block target files to remove all content that poses a potential threat and provide the best protection from 
active computer virus attacks. Blocking target files is also the only protection available from a virus that is 
so new that no effective virus scanner protects against it. You would not normally run the DFL-500 with 
blocking turned on. However, it is available for extremely high risk situations where there is no other way 
to prevent viruses from entering your network. 

· 

Scan all target files for viruses 
The antivirus scanning engine performs signature and macro virus scanning on all target files. If a virus is 
found in a file, the virus scanner deletes the file and replaces it with an alert message that is forwarded to 
the user. If a virus is not found, the file is forwarded unchanged to the user. Virus scanning prevents 
known viruses from passing through the DFL-500 and does not affect virus-free HTTP downloads and 
email attachments. 

· 

Identify and remove files known to be used by worms 

For each of the content protocols, you can configure antivirus protection separately for different DFL-500 
traffic streams. You can configure the DFL-500 to scan all email from the Internet for viruses and worms 
before it is received on your internal network, while providing less protection for traffic between other more 
protected networks. 
DFL-500 virus and worm protection is transparent to the end user. Client and server programs require no 
special configuration, and DFL-500 high-performance hardware and software ensure there are no noticeable 
download delays. 
This chapter describes: 

· 

Configuring antivirus protection

 

· 

Worm protection

 

· 

Customize antivirus messages

 

· 

Updating your antivirus database

 

· 

Displaying virus and worm lists

 

Configuring antivirus protection 

To begin configuring antivirus protection you: 

· 

Select the content protocol (HTTP, SMTP, POP3 or IMAP) 

DFL-500 User Manual 

91

Содержание DFL-500













































































































































Отзывы:

Нет отзывов

Похожие инструкции для DFL-500

Asus AAEON FWS-2272 User Manual preview
AAEON FWS-2272
Бренд: Asus Страницы: 93
Huawei E8000E-X16 Manual preview
E8000E-X16
Бренд: Huawei Страницы: 182
Nokia IP45 Quick Start Manual preview
IP45
Бренд: Nokia Страницы: 4
Nokia IP530 - Remote Access Server Installation Manual preview
IP530 - Remote Access Server
Бренд: Nokia Страницы: 9
Nokia IP71 User Manual preview
IP71
Бренд: Nokia Страницы: 120
Nokia IP710 Series Installation Manual preview
IP710 Series
Бренд: Nokia Страницы: 182
SonicWALL TZ500 Quick Start Manual preview
TZ500
Бренд: SonicWALL Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды