D-Link DFE-570TX, Руководство пользователя

Страница: 21 / 29

15
1. Ascertain that the adapter is fully and firmly seated in
the slot connector.
2. Check the length and rating of connecting cables.
3. Ascertain that the adapter’s PCI slot is not deactivated
at the BIOS level. The CMOS Setup utility in PCI
computers ordinarily provides the option to activate or
deactivate PCI slots.
4. Replace the adapter in question with a verified adapter
and run the diagnostic test again.
5. Install the questioned adapter in another PCI computer
and run the tests again.
6. Remove all other PCI adapters from the computer and
run the tests again. If the verification/diagnostic run is
then normal, then there is probably an interrupt
number conflict which will have to be resolved
manually by a CMOS Setup utility run after you have
reinstalled all of the expansion cards.
The Server Card features three LED indicators to assist in
the resolving of network diagnostics:
•
100M Speed Indicator is located in the upper-left corner
of each port.
This LED lights green (ON) when 100Mbps speed is
selected and dark (OFF) when 10Mbps is negotiated.
• LINK/ ACT Indicator is located in the upper-right
corner of each port.