D-Link DFE-550TX, Руководство пользователя

Страница: 21 / 34

D-Link DFE-550TX Adapter
10
Software Installation
On account of the great variety of network environments in
which the DFE-550TX may be used, the instructions for
software installation are given as README files on the DFE-
550TX Software CD-ROM. Review the root directory and locate
the subdirectory containing the appropriate software for use
with your network operating system. Access the README file
for overview information. For full installation details, see the
README file and the referenced instruction files in the sub-
directory.
Verification/Diagnostic Program
This test program verifies configuration of the DFE-550TX as set
by the installation procedure, and assists with isolation of any
faults in operation. Verification and testing procedures are
optional, and will only be useful in the unusual event that there
is a fault, such as an interrupt number conflict among your
computer expansion cards. If your installation provides normal
operation, you might choose to skip these procedures.
The Verification/Diagnostic Program provides two levels of
testing: adapter function testing and network operation testing.
Adapter testing includes a variety of diagnostic procedures.
Adapter testing does not require substitution of a loopback
cable. All procedures of the Adapter test may be carried out
with the network cable connection in place.
For the network operation test, the cable connecting your
station with its supporting hub must be in place. Network
testing involves the broadcast transmission of test packets from
the primary station. The test cannot be fully implemented
unless a second station on the LAN is available to the network
operation test, in order to return the test packets to the primary
station.
To run the Verification/Diagnostic Program, proceed with these