D-Link DES-7200, Справочное руководство CLI, Страница: 601 / 1180

DES-7200 CLI Reference Guide Chapter 34 Protocol-independent Configuration Commands
34-37
Usage
guideline
Multiple tags may follow the match tag command.
You can redistribute the routing information from one routing process
to another routing process. For example, you can redistribute the
route in the OSPF routing domain and then advertise it to the RIP
routing domain, and vice versa. The mutual route redistribution can
be implemented between all the IP routing protocols.
In the route redistribution, route maps are usually used to control the
mutual route redistribution between two routing domains.
In configuring one route map, one or more match or set commands
can be executed. If the match command is not used, all the routes will
be matched. If the set command is not used, no operation will be
performed.
Examples
In the example below, the RIP routing protocol redistributes only the
routes with tag 50 and 80 in the OSPF routing domain.
router rip
redistribute ospf 100 route-map redrip
network 192.168.12.0
route-map redrip permit 10
match tag 50 80
Related
commands
Command Description
access-list
Set the access list.
match ip address
Match the IP address.
match interface
Match the next-hop IP
interface.
match ip route-source Match the source IP address.
match metric
Match the metric.
match ip next-hop
Match the next-hop IP
address.
match route-type
Match the route type.
set metric
Set the metric.
set metric-type
Set the metric type.
set tag
Set the tag.