D-Link DES-7000 Series, Руководство пользователя

Страница: 34 / 111

DES-7000/DES-7100 Layer 2 Switch User
’
s Guide
Switch Management
32
User Accounts
The DES-7000 Series Switch is not assigned administrator-level user account information when
shipped. If this is the first time you setting up the switch, assigning an administrator-level user account
should be a priority. Once user accounts have been assigned, at least one administrator-level user
account should be kept. The exception might be if you use the
reset {all}
command, in this case
all user account information is erased.
Use the
create account
command to create a new administrator-level user account. To set up an
administrator account, type the command
create account admin
followed by a user name. The
command syntax is
create account admin <user name>
. Then you are be prompted for a new
password, type the case-sensitive password and press Enter. Type the same password again to
confirm it.
Figure 5- 2. Create Administrators User Account
The Success message indicates the new user account has been successfully created. If the new
password entry does not match the confirmation you will be prompted to repeat the password entry.
Be sure to save the new user accounts information before powering off or rebooting the Switch.
To create additional user accounts, use the following syntax:
create account [admin/user]
<user name> .
The admin or user declares the level of user privilege. At least one administrator-
level user account should be maintained in the system.
To delete a user account, use the following syntax:
delete account <user name> .
Remember to
keep at least one administrator-level user account in the system.
To view existing user accounts use the
show account
CLI command.