D-Link DES-3550, Справочное руководство по интерфейсу командной строки

Страница: 133 / 323

DES-3550 Layer 2 Fast Ethernet Switch
config 802.1p user_priority
Purpose Used to map the 802.1p user priority of an incoming packet to one
of the four hardware queues available on the Switch.
Syntax config 802.1p user_priority <priority 0-7> <class_id 0-3>
Description
This command allows you to configure the way the Switch will map
an incoming packet, based on its 802.1p user priority, to one of the
four available hardware priority queues on the Switch.
The Switch’s default is to map the following incoming 802.1p user
priority values to the four hardware priority queues:
802.1p Hardware Queue Remark
0 1 Mid-low
1 0 Lowest
2 0 Lowest
3 1 Mid-low
4 2 Mid-high
5 2 Mid-high
6 3 Highest
7 3 Highest.
This mapping scheme is based upon recommendations contained in
IEEE 802.1D.
You can change this mapping by specifying the 802.1p user priority
you want to go to the
<class_id 0-3> (the number of the hardware
queue).
<priority 0-7>
−
The 802.1p user priority you want to associate with
the <class_id 0-3> (the number of the hardware queue) with.
<class_id 0-3>
−
The number of the Switch’s hardware priority
queue. The Switch has four hardware priority queues available.
They are numbered between 0 (the lowest priority) and 3 (the
highest priority).
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure 802.1 user priority on the Switch:
DES-3550:4# config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DES-3550:4#
129