xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
IGMP Multicast Group Profile Settings
Users can add a profile to which multicast address reports are to be received on specified ports on the Switch. This
function will therefore limit the number of reports received and the number of multicast groups configured on the Switch.
The user may set an IP Multicast address or range of IP Multicast addresses to accept reports (Permit) or deny reports
(Deny) coming into the specified switch ports.
To view the following window, click
L2 Features > L2 Multicast Control > Multicast VLAN > IGMP Multicast Group
Profile Settings
, as shown below:
Figure 4-65 IGMP Multicast Group Profile Settings window
The fields that can be configured are described below:
Parameter
Description
Profile Name
Enter a name for the IP Multicast Profile.
Click the
Add
button to add a new entry based on the information entered.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Delete All
button to remove all the entries listed.
Click the
View All
button to display all the existing entries.
Click the
Delete
button to remove the corresponding entry.
Click the
Group List
link to configure the Multicast Group Profile Address Settings for the specific entry.
After clicking the
Group List
link, the following page will appear:
Figure 4-66 Multicast Group Profile Multicast Address Settings window
The fields that can be configured are described below:
Parameter
Description
117
