D-Link DES-3526 - Switch - Stackable, Руководство пользователя

Страница: 153 / 258

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
140
Figure 7- 24. Current Accounts window
In the example screen above, the User Account “Trinity” has been previously set using the User
Accounts window in the
Security Management folder. A User Account MUST be set in order to set
the parameters for the SSH user. To configure the parameters for a SSH user, click on the hyperlinked
User Name in the
Current Accounts window, which will reveal the following window to configure.
Figure 7- 25. SSH User window
The user may set the following parameters:
Parameter Description
User Name Enter a User Name of no more than 15 characters to identify the SSH user. This User
Name
must be a previously configured user account on the Switch.
Auth. Mode The administrator may choose one of the following to set the authorization for users
attempting to access the Switch.
Host Based – This parameter should be chosen if the administrator wishes to use a
remote SSH server for authentication purposes. Choosing this parameter requires the
user to input the following information to identify the SSH user.
•
Host Name – Enter an alphanumeric string of no more than 31 characters to
identify the remote SSH user.
•
Host IP – Enter the corresponding IP address of the SSH user.
Password – This parameter should be chosen if the administrator wishes to use an
administrator-defined password for authentication. Upon entry of this parameter, the
Switch will prompt the administrator for a password, and then to re-type the password
for confirmation.
Public Key – This parameter should be chosen if the administrator wishes to use the
publickey on a SSH server for authentication.
Host Name Enter an alphanumeric string of no more than 31 characters to identify the remote
SSH user. This parameter is only used in conjunction with the Host Based choice in
the Auth. Mode field.
Host IP
Enter the corresponding IP address of the SSH user. This parameter is only used in
conjunction with the Host Based choice in the Auth Mode field