D-Link DES-3205, Руководство по установке оборудования

Страница: 33 / 60

D-Link™ Hardware Installation Guide – DES-3200 Series Switch
Web-based Switch Configuration - Web Pages Page | 33
NOTICE: Any changes made to the Switch configuration during the current session must be
saved in the Save Changes web menu (explained below) or use the command line interface
(CLI) command save.
W
EB
P
AGES
When you connect to the management mode of the Switch with a Web browser, a login window is displayed. Enter a
user name and password to access the Switch's management mode.
Below is a list and description of the folders and main windows available in the Web interface:
Configuration – Contains main windows concerning Device Information, System Information, Serial Port Settings,
IP Address, Port Configuration, Static ARP Settings, User Accounts, System Log Configuration, DHCP Relay,
DHCP Auto Configuration Settings, MAC Address Aging Time, Web Settings, Telnet Settings, Password
Encryption, CLI Paging Settings, Firmware Information, SNTP Settings, SMTP Settings, MAC Notification Settings,
SNMP Settings, Time Range Settings, Single IP Management, Gratuitous ARP, and ARP Spoofing Prevention
Settings..
L2 Features – Contains main windows concerning Jumbo Frame, 802.1Q Static VLAN, Q-in-Q, 802.1v Protocol
VLAN, VLAN Trunk Settings, GVRP Settings, Asymmetric VLAN Settings, MAC-based VLAN Settings, PVID Auto
Assign Settings, Port Trunking, LACP Port Settings, Traffic Segmentation, L2PT Settings, IGMP Snooping, MLD
Snooping Settings, Port Mirror, Loopback Detection Settings, Spanning Tree, Forwarding & Filtering, NLB Settings,
LLDP, Ethernet OAM, CFM, and ERPS Settings.
QoS – Contains main windows concerning Bandwidth Control, Traffic Control, 802.1p Default Priority, 802.1p User
Priority, QoS Scheduling Settings, Priority Mapping, TOS Mapping, and DSCP Mapping.
Security – Contains main windows concerning Safeguard Engine, Trusted Host, IP-MAC-Port Binding, Port
Security, 802.1X, SSL Settings, SSH, Access Authentication Control, MAC-based Access Control, DoS Prevention
Settings, and DHCP Server Screening.
ACL – Contains the main windows concerning ACL Configuration Wizard, Access Profile List, CPU Access Profile
List, ACL Finder, and ACL Flow Meter.
Monitoring – Contains main windows concerning Cable Diagnostic, CPU Utilization, Port Utilization, Packet Size,
Memory Utilization, Packets, Errors, Port Access Control, Browse ARP Table, Browse VLAN, IGMP Snooping,
MLD Snooping, LLDP, MAC-based Access Control Authentication State, Ethernet OAM, CFM, Browse Session
Table, MAC Address Table, and System Log.
Save & Tools – Contains main windows concerning Save Configuration, Save Log, Save All, Configuration File
Upload & Download, Upload Log File, Reset, Ping Test, Download Firmware, and Reboot System.
NOTE: Be sure to configure the user name and password in the User Accounts window before
connecting the Switch to the greater network.