33
When the 10/100M port is set to
full-duplex mode
, then the flow
control will be automatically set to
disable
;
and if the 10/100M port is
set to
half-duplex mode
, the flow control will be automatically set to
enable
.
QoS:
In some ports that need to have a high priority to manage the data
transfer, QoS should be change, Set the port’s QoS to high to
determine the port will always transfer their data first.
VLAN Settings (Virtual Local Area Network)
A VLAN is a collection of switch ports that make up a single
broadcast domain. You can configure a VLAN for a single
switch, or for multiple switches. When you create a VLAN, you
can control traffic flow and ease the administration of moves,
adds, and changes on the network, by eliminating the need to
change physical cabling.
On VLAN settings, there are two main settings, VID Table Setting
and Port VLAN Setting.
VID:
Select the VID group that you set.
When you select VID Table Setting, press “Add new VID” to create
new VID group, from port 01 ~ port 16, select Untag Port, Tag Port,
or Not Member for each port. To save the VID group, press the
“Apply” button. To remove the selected VID group, select the VID
group and press “Remove the VID” button. To modify the VID group
setting, select the VID group and change the setting, and press the
“Apply” button to save the settings.
Содержание DES-1316 - Switch
