DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
274
DES-1228/ME:4#create address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-00-00-00-
00-04
Command: create address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-00-00-00-00-04
Success.
DES-1228/ME:4#
config address_binding ip_mac ipaddress
Purpose
Used to configure an IP-MAC Binding entry.
Syntax
config address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports
[<portlist> | all]}
Description
This command will configure an IP-MAC Binding entry.
Parameters
<ipaddr>
– The IP address of the device where the IP-MAC binding is made.
<macaddr>
– The MAC address of the device where the IP-MAC binding is made.
<portlist>
– Specifies a port or range of ports to be configured for address binding.
all
– Specifies that all ports on the switch will be configured for address binding.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure address binding on the Switch:
DES-1228/ME:4#config address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-00-00-00-
00-05
Command: config address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-00-00-00-00-05
Success.
DES-1228/ME:4#
config address_binding ip_mac ports
Purpose
Used to configure an IP-MAC state to enable or disable for specified ports.
Syntax
config address_binding ip_mac ports [<portlist> | all] state [enable | disable]
allow_zeroip [enable | disable]
Description
This command will configure IP-MAC state to enable or disable for specified ports.
Parameters
<portlist>
−
Specifies a port or range of ports.
all
– specifies all ports on the switch.
state [enable | disable]
– Enables or disables the specified range of ports.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure address binding on the Switch: