D-Link DE-528CT, Руководство по установке

Страница: 22 / 42

DE-528CT Ethernet Adapter / User s Guide
5-2 Configuration and Diagnostics
Configuring DE-528CT
Choose Set Up New Configuration from the Main Menu dialog box, then
the Set Up New Configuration Menu appears.
Run Diagnostics
Choose Run Diagnostics from the Main Menu dialog box, then the Run
Diagnostics Menu appears which provides three testing levels:
EEPROM Test
This test verifies the mode and the register information on the
EEPROM.
On Board Diagnostics
4
To run this test, choose Run Diagnostics On Board from the Run
Diagnostics Menu dialog box.
This is a series of tests designed to check Network Controller
Registers, on-board RAM, Internal Loopback and Interrupt Generation.
Network Diagnostics
To run this test, choose Run Diagnostics On Network from the Run
Diagnostics Menu dialog box.
This test verifies that the network cable is connected properly, sothat
the adapter can send and receive data successfully.
This test requires two computers, the master computer and a second
computer. The master computer, configured as the a data generator,
generates and transmit packets. The second computer, configured as
the data receiver, receives packets and transmits them back to the data
generator.
4
The On Board Diagnostics test must be run before the Network Diagnostics test is run, in order to ensure
the adapter s basic functions are working properly.