25
D-Link DCS-5222LB1 User Manual
Section 4 - Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to
configure your new D-Link Camera and connect the camera to the
Internet.
Note that this wizard will not register your camera with
mydlink.com
.
Click
Next
to continue.
Select
Automatic IP Address
if you want your DHCP server (usually
enabled on your router) to assign the camera its IP settings. If you
want to manually assign the IP settings, select
Static IP Address
and
enter the following details:
Enter an IP address for your camera.
Enter the subnet mask of your network.
Enter the default gateway address. This is
usually the IP address of your router.
Enter the primary DNS server’s IP address. This
is usually the IP address of your router.
Enter the secondary DNS server’s IP address.
This is optional.
If you are required to connect using PPPoE,
select
Enabled
and enter the Username and
Password for your PPPoE connection. Only select
this option if your camera is directly connected
to your broadband modem. If it is on a network
with a router or gateway, do not select this
option.
Click
Next
to continue.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
