34
D-Link DCS-5000L User Manual
34
Section 3 - Configuration
Wireless Setup
Check this box to allow your camera to connect to your
network wirelessly.
Enter the network name (SSID) of the wireless network you
want to connect to. You can also click the
Site Survey
button
below to choose an available network and fill in settings
automatically.
If you are using
Ad-Hoc
as your connection mode, select the
same channel that is being used by your wireless network.
Select the connection mode used by your wireless network.
In most cases, you should select
Infrastructure
.
Ad-Hoc
is
only used if your camera is directly connecting to another
PC or device without the use of a router or access point.
Clicking this button will allow you to select an available
wireless network to connect to, and will fill in the necessary
settings for you.
Select the wireless security mode used by your wireless
network. If you select WEP or WPA-PSK/WPA2-PSK, enter
the password for your wireless network in the text box that
appears.
Enable
Wireless:
SSID:
Channel:
Connection
Mode:
Site Survey:
Wireless
Security
Mode:
This section allows you to set up and configure the wireless settings on your camera.
