background image

65

D-Link DCS-4602EV User Manual

Section 3: Configuration

Here you can define which IP addresses are allowed to view your DCS-4602EV. You can set up to 7 IP address ranges for both the allow and deny 

lists.

Access List

Allow List:

Start IP 

Address:

End IP Address:

Delete Allow 

List:

Deny List:

Start IP 

Address:

End IP Address:

Delete Deny 

List:

The section lets you define what IP addresses have access rights to the 

camera.

Note

: When adding entries to the Allow list, make sure the first entry includes 

the IP address of the computer or device you are using to access the camera. 

Otherwise, you may be blocked from accessing the camera after adding the 

entry to the Allow list.

The starting IP address of the IP address range for the devices (such as a 

computer) that have permission to access the video of the camera. 

The ending IP address of the IP address range for the devices (such as a 

computer) that have permission to access the video of the camera. Click 

Add

 

to save your changes.

Select an entry to remove from the Allow List, then click 

Delete

.

The list of IP addresses that have no access rights to the camera.

The starting IP address of the IP address range for the devices (such as a 

computer) that will be denied access to the camera. 

The ending IP address of the IP address range for the devices (such as a 

computer) that will be denied access to the camera. Click 

Add

 to save your 

changes.

Select an entry to remove from the Deny List, then click 

Delete

.

Note

: All addresses in the Deny List will be denied access, even if they are 

also in the Allow List.

Содержание DCS-4602EV





























































































Отзывы: