D-Link DCS-3716, Руководство пользователя

Страница: 31 / 63

31 D-Link DCS-3716 User Manual
Configuration
Motion Detection
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for monitoring.
Enable.Video.Motion:
Sensitivity:
Percentage:
Draw.Motion.Area:
Erase.Motion.Area:
Select this box to enable the motion detection feature
of your camera.
Specifies the measurable difference between two
sequential images that would indicate motion. Please
enter a value between 0 and 100.
Specifies the amount of motion in the window being
monitored that is required to initiate an alert. If this
is set to 100%, motion detected within the whole
window will trigger a snapshot.
Draw the motion detection area by dragging your
mouse in the window (indicated by the red square).
To erase a motion detection area, simply click on the red square that you wish to remove.
Right-click on the camera image to bring up the following menu options:
Select.All:
Draws a motion detection area over the
entire screen.
Clear. All: Clears any motion detection areas that
have been drawn.
Restore:
Restores the previously specified motion
detection areas.