D-Link DCS-3511/DCS-3530 Quick Install Guide
5
E
N
G
LIS
H
3. Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note:
Once power has been established, the LED will turn red. When the device has
obtained an IP address and is accessible, the LED will turn green.
