5
D-Link DCS-3411/3430 Quick Install Guide
Hardware Overview
I/O Connector
The DCS-3411/3430 provides a terminal block with three pairs of
connectors situated on the back panel. Two pairs are for input and
the other is for output. The I/O connectors provide the physical
interface to send and receive digital signals to and from a variety
of external devices.
Link LED
Once a connection has been
established via Ethernet port, the
LINK LED will turn solid green. If
traffic is passing to the camera, the
LINK LED will blink. If no ethernet
connection is detected, the LINK
LED will not light up.
Reset Button
Reset will be initiated when the reset button
is pressed once and held until the Power
LED flashes through its cycle twice.
