D-Link DCS-3110 - SECURICAM Fixed Network Camera, Руководство пользователя

Страница: 62 / 96

D-Link DCS-3110 User Manual
Section - Configuration
With digital PTZ (Pan/Tilt/Zoom) feature enabled, it is possible to zoom
in and out video recieved from the DCS-3110.
Enable PTZ Operation
To utilize this feature, please connect the DCS-3110 to a PTZ scanner via
RS485 interface and follow the instructions given below. Three PTZ drivers are
supported:
• DynaDome/SmartDOME
• Lilin PIH-7x00
• Pelco D protocol
Note: If none of the above PTZ drivers is supported by your PTZ scanner, please
select
Custom camera.
1. Connect to your PTZ scanner, set the Camera ID, PTZ driver, and Port
settings.
2. Select
Enable PTZ Operation and then click Save to take effect.
3. The PTZ control buttons will be displayed in the main page.
Preset Position
Click Preset Position to set the preset position for the Network Camera. A total of
20 preset positions can be configured.
To set a preset position, follow the steps given below:
1. Adjust the Network Camera to a desired position using the buttons on the
right side of the window.
2. In the
Preset position name text box, enter a descriptive name for the preset
position. You can enter up to 40 characters in the text box.
3. Click Add. The preset position name will appear in the drop-down list.
To remove a preset position from the list, select a preset position name from the
drop-down list and then click
Delete.
RS485