D-Link DCS-1000, Руководство по установке, Страница: 5 / 8

•
In the “ Location ” field, type a description of your choosing.
•
In the “ Admin ” field, type a username that will be used as the Administrator
account. We highly recommend that you change this setting now to enable
the highest security for the camera.
•
Type a unique Admin Password into the “Admin Password” and “Confirm
Password” fields.
•
In the Manually Assign section, input the correct settings for this camera into
the “
IP Address ”, “ Subnet Mask ” and “ Default Gateway ” fields. If you
are not sure what these settings should be, please contact your network
adminstrator to determine the correct settings.
•
The Default Gateway is the IP address of your Router. This settings allows
the DCS-1000 to be seen from the public Internet.
•
Next, type in the “ DNS IP Address ” of your Domain Name System servers
into the cooresponding fields. These settings will be detirmined by your ISP.
•
In the LED Control Settings section, choosing one of the following:
§
Normal: Lights operate normally.
§
OFF: Lights will stay off.
§
Dummy: Lights will operate randomly.
•
Refer to the Manaul for instructions on how to use the “ Loading Active X
From ” setting.
•
The Open Second Port section is reqired to be used when installing a DCS-
1000 on a network with a public web server. Please refer to the Manual for
detailed information regarding this feature.
•
Press the Save button to save the settings.
•
The camera is now configured to work on your network. If you were
required to change the IP address of a computer on your network to make
these changes to the camera, you may now change the settings back to their
original settings.
•
For instructions and details related to other settings related to System
Administration settings, please refer to the Manual.