D-Link DBT-900AP, Быстрое руководство по установке

Страница: 2 / 53

2
Connect the DBT-900AP Bluetooth
Access Point to Your Network
Straight up the antenna of the DBT-900AP
You may need to adjust the direction of the antenna to get better signal strength.
Attach the External Power Supply for DBT-900AP
Attach the external power supply to the DC power input connector located on the rear
panel of DBT-900AP and connect it to your local power supply. The Power LED will
turn ON to indicate proper operation.
Connecting DBT-900AP to Your Network
Insert one end of the cable to the Ethernet port on the back panel of the DBT-900AP
and the other end of the cable to an Ethernet Broadband Router (i.e., D-Link DI-
604) or Switch (i.e., D-Link DES-1005D) that supports DHCP Client function. The
LAN LED light will illuminate to indicate a proper Ethernet connection.
Note: The Ethernet Port on DBT-900AP is Auto-MDI/MDIX. Meaning you can use a
straight-through or crossover-Ethernet cable to connect to the Ethernet port on the
DBT-900AP.
Connect Bluetooth-enabled
computers to DBT-900AP
Note:
This Access Point supports the state-of-the-art PAN profile. Please make sure if your
Bluetooth Software installed in your computers or PDAs support this profile before
this step.
This Access Point does not need to install any specific driver; it requires the Bluetooth
adapter (for example: D-Link DBT-120 USB Bluetooth Adapter) to be installed on the
PC or laptop computer in order to access to the DBT-900AP wirelessly.
The step-by-step instructions that follow are shown with Widcomm Bluetooth Software
(version 1.4 or above) that included with D-Link DBT-120 USB Bluetooth Adapter
under Windows 98SE/ME/2000.
Right-click to the “B” logo on the system tray and choose “Explorer” or double click
“My Bluetooth Places” to open Bluetooth Adapter.